Skip to main content
× Home Services Products Catalogs Downloads Tech Support About Contact Careers (505) 872-0037

(505) 872-0037

Shopping Cart Icon
cart
 
Login Icon
login
Adixen 2021C2 Pumps On Sale Agilent Varian Helium Leak Detectors On Sale Pfeiffer ASM340 Leak Detectors On Sale Agilent IDP-10 Dry Scroll Vacuum Pumps On Sale Agilent TriScroll Pumps On Sale Agilent IDP-7 Dry Scroll Vacuum Pumps On Sale

Keyword       Ideal Vacuum Part Number       Manufacturer Part Number

× Vacuum Pumps Modular Vacuum Chambers Stainless Steel Vacuum Chambers Aluminum Vacuum Chambers ExploraVAC Unlimited Chambers ExploraVAC TVAC Test Chambers Fittings and Flanges Feedthroughs Vacuum Valves Rebuild Kits, Parts, And Motors Vacuum Fluids, Oils, and Greases Turbo Pumps And Controllers Filters Traps and Silencers Convection and Vacuum Ovens Leak Detection and RGA Vacuum Pressure Measurement Recirculating Chillers And Water Baths
Product Image 1
Product Image 2
Product Image 3

Condition:
  New
Part Number:
  P105865
Warranty:
  Welch Warranty

Out of Stock   Welch 2534 WOB-L Piston Pressure And Vacuum Pump, 50 PSI, 95 Torr Vacuum, 34 LPM, 115 VAC 1116.12
Expecting:   2
Anticipated Arrival:  2 on 2024-04-28


Sale: $1,116.12


×

Load

Print Version

Welch 2534 WOB-L Piston Pressure And Vacuum Pump, 50 PSI, 95 Torr Vacuum, 34 LPM, 115 VAC


Welch 2534 WOB-L Piston Pressure And Vacuum Pump, Pressure to 50 PSI, Vacuum to 95 Torr, 34 LPM Pumping Speed, 115 VAC
Welch Vacuum Part Number 2534B-01


The Welch 2534 is a vacuum and pressure pump all-in-one is are perfect for many common laboratory vacuum applications. The 2534 produces an ultimate vacuum pressure of 95 Torr (26.2 inches of Hg), maximum positive pressure up to 50 PSI, has a 34 liters per minute (1.20 CFM) pumping speed, and includes dial pressure gauges, regulators, and moisture traps on both the vacuum low pressure and positive pressure sides of the pump.

The Welch 2534 WOB-L is a laboratory duty dry oil-free diaphragm vacuum and pressure pump all-in-one. It produces vacuum on the suction side and pressurizes those evacuated gases to positive pressure one the other side. The Welch 2534 includes both vacuum and positive pressure side regulators, dial gauges, and moisture traps. The two regulators and two gauges make it easy to meet your vacuum and pressure requirements. The vacuum regulator and vacuum dial gauge are attached to the intake port. The vacuum regulator allows the vacuum level to be set between roughly atmospheric pressure and the maximum vacuum allowed for the pump model. A moisture trap keeps water from accidentally being drawn into the unit. The pressure regulator and pressure dial gauges are attached to the discharge port. The pressure regulator allows discharge pressure to be set between atmospheric and the maximum possible for the pump model. Discharge air is filtered and noise is muffled with a filter.

The Welch 2534 WOB-L pressure and vacuum pump come with intake and discharge hose barbs which accept 1/4” ID rubber pressure and vacuum hose. Hose clamps should be used to hold the hose in place. Since the vacuum side operates in the viscous flow regime, the small diameter of the hose will generate minimal conductance loss. For best results, we recommend the length of the tubing between the chamber and the pump be kept as small as possible.

The Welch 2534B-01 WOB-L pressure and vacuum pump come with dial gauges mounted on the regulator assemblies. The vacuum gauge gives negative pressure - that is pressure below atmospheric. The reference point for the vacuum gauge is atmospheric pressure. The pressure gauge gives pressure above atmospheric. The reference point for the pressure gauge is atmospheric pressure. Please keep in mind that atmospheric pressure tends to vary from day to day. As a result of this variability, the dial vacuum gauge will indicate slightly different maximum vacuum readings from day to day.

The pumps will handle humid air and all wetted aluminum parts are treated for corrosion protection from moisture. All other wetted parts are stainless steel. A plastic trap with a ball check valve is attached to the regulator assembly to prevent water condensate from accidentally being ingested into the pump. If there is a chance liquid may be drawn from the process under evacuation, we recommend and additional liquid trap be placed between the process and the pump. A simple liquid trap is a filtering flask. When a heavy load of water vapor is evolved from the vacuum process, a cold trap is recommended to help prevent damage to the pump mechanism. A user's manual, brochure, and catalog sections in PDF format are available for downloaded below.




Press ESC to Close



PDF Logo Welch 2561, 2563 WOB-L Dry Piston Vacuum Pump Parts List and Exploded View.pdf

PDF Logo Welch 2511, 2522, 2534, 2546, WOB-L Series Dry Piston Vacuum Pump Data Sheet.pdf

PDF Logo Welch 2522, 2534 WOB-L Dry Oil-Free Diaphragm Vacuum Pump Owner's Manual.pdf



You may wish to consider the following products:

Ideal Vacuum Logo Water Mark
CONTACT US
Ideal Vacuum Products, LLC
5910 Midway Park Blvd NE,
Albuquerque, NM 87109-5805

Phone: (505) 872-0037
Fax: (505) 872-9001
info@idealvac.com



Press ESC to Close


deepbox image 2